Very positive emotions. It's just a pity that there is no support in Ultimaker Cura. But it's a matter of habit to use Anycubic's own slicer.
Great, for intensive use the max version would be more suitable.
For home use it's perfect
Excellent quality replacement release film (FEP) for Mono M7 printer. The label on each film makes assembly very easy.
Jag har inte haft några problem med den så länge jag har haft den. Fungerar felfritt även med ABS. Rekommenderas verkligen!
My very first 3D printer. Setup and installation without any problems. First print a Benchy, which stopped printing with error code 11511 halfway through the print. Could not pull the filament back and ended up taking the extruder apart to remove the jammed filament. Which took several hours. After assembling the extruder, I tried to print a Benchy again and this time I got an error code 11504. It turned out to be the small spring that was not seated properly in the small detector plate. After everything was reassembled, the printer worked. and has not really stopped since. I really need 1 or 2 more printers but will probably try a different brand.
I bought these translucent resins in blue, green, red and yellow. They are easy to work with, stick well to the build plate and the supports are easy to remove.
The only downside it the surface becomes matte after washing, as most resins do. Varnishing makes it somewhat shiny again. Great product.
Decent works at first try. Very good for the price point. Had some trouble fitting the wire in the (small)housing.
It was a present for my kid. He's very pleased. Nice price/quality relation.Hope the durability is good too.
Wonderful printer that gets the job done.
Im coming from a custom built bedslinger so it is nice to have a printer that you almost can forget and it just print. :)