Anycubic Kobra S1 Combo 3D Printer, 4 Stunning Multicolor, Intelligent Drying While Printing, Built-in Camera, 600mm/s High Speed and 320℃ Hotend Free-Clog Extruder

Very happy with the combo!

Very positive emotions. It's just a pity that there is no support in Ultimaker Cura. But it's a matter of habit to use Anycubic's own slicer.

My very first 3D printer. Setup and installation without any problems. First print a Benchy, which stopped printing with error code 11511 halfway through the print. Could not pull the filament back and ended up taking the extruder apart to remove the jammed filament. Which took several hours. After assembling the extruder, I tried to print a Benchy again and this time I got an error code 11504. It turned out to be the small spring that was not seated properly in the small detector plate. After everything was reassembled, the printer worked. and has not really stopped since. I really need 1 or 2 more printers but will probably try a different brand.

Good quality prints with almost no setup. It was easy to start. The Multi colour holder had some issue at the beginning to catch the filament but after it solved everithyng works perfectly.

The printer is not bad but the defects it has are almost impossible to solve, material from the same brand that is supposed to be read trough the nfc tag has wrong printing temps, if you’re making the filament, dryer and printer in my opinion you should be able to give a decent experience but no you have to calibrate also the temps for every material. It took me 2 days only to get the WiFi working because why not save 20cents of production cost and get a bad WiFi chip. Overall it feels like it was made with getting a final product but not providing a decent experience

I don't usually write reviews but for this one I just had to.

The Anycubic Kobra S1 Combo has been a complete surprise in all the right ways. Right out of the box, setup was quick and straightforward – no assembly, just unpack, unscrew a couple screws, plug in and blam. The printer autolevels and calibrates, and I could start printing. The print quality is excellent, matching what I get from my Creality K1C, with smooth layers and consistent results across different materials (well so far PLA and PETG).

Maintenance seems to be really simple though I haven't had to do anything other than lubricating. In my opinion it’s also quieter than my K1C. The slicer works well and is familiar since it is based on OrcaSlicer. The mobile app is decent and the printer UI is good, though I’d like to replace the timelapse transfers via USB with a cloud solution.

Of course the big thing for me is the built-in multifilament system with active filament drying for up to four spools. I used to dry the spools one at a time, which was slow. Of course, without the multifilament system I was limited to one color or manual filament switches... no thanks. The multifilament system is not too loud even with the drying on and everything just works.

On top of everything, I got this for half the price I would’ve paid for a K1C with a multifilament system (which doesn't come with drying). I was originally considering just buying the multicolor upgrade for my K1C, but for almost the same price, I ended up with an entirely new printer and a multifilament system and I don't regret it one bit.

I don't hate my K1C, quite the opposite, but the Anycubic Cobra S1 combo has just been so overwhelmingly positive in every area that it deserves every praise.

If you’re a 3D printer manufacturer, you better step up your game – Anycubic is not playing around.

Also, if you are ready to snatch one of these, you can use my link https://eu.anycubic.com/?ref=APUPRINTS and my code APUPRINTS at checkout to get a little extra discount! Happy Printing!

I wass a little bit reticent when i bought the printer e managed to get it for about 450 euro with a promo code with the ACE
The shiping took a little bit longer , about 12 days but it wasn t a big problem
I unboxed the printer, set it up , did first time calibration and started to print and i m blown away by the quality of the print ,the speed of the printerand i didn't have a single print failure sibce then .
I think that for the money is the best system

Perfect printer vfm

I am very satisfied with my new Kobra S1, it prints really well, and so far I have had no problems with it.

It is good and fast, but few things would make more sense:
1) I'm using Orca slicer for all my printers, and this one is not compatible ... for now - I hope :)
2) Its not that clog-free. Running it 24/7 back to back prints, had to remove nozzle 3 times already - just installed new hotend, maybe it will help. Full metal would have been better.
3) Haven't tried combo yet, so no feedback on it.