Anycubic ACE Pro

The numbered annotations on the product page correspond to the following explanations:
① This function requires 2 ACE Pros.
② It must be used with Anycubic filaments with Intelligent Identification Filament Sync functions.
③ *Data provided by the Anycubic Lab.

Currently, the ACE Pro multi-color printer box supports up to four-color printing. For eight-color printing, it requires the use of a professional hub, along with two AnyCubic Color Engine Pro units connected simultaneously. This professional accessory is expected to be released in the near future. Please stay updated through our official channels for further information on its availability.

Yes. The ACE Pro can precisely detect Intelligent Identification Filament and automatically optimize printer settings for the best results. If users print with filaments that lack an intelligent identification chip, the ACE Pro will not automatically detect the material and color.

We highly recommend installing the ACE Pro device on the left side of the Kobra 3 printer. This suggestion is based on the design specifications of the Teflon tube and hub accessories, which are optimized for placement on the left side.
Placing the ACE Pro device on the right side may potentially interfere with the smooth advancement of the filament, leading to irregular filament feed. Therefore, to ensure optimal performance and functionality, we advise adhering to the left side installation.

No. The ACE Pro includes heating elements for drying, but it is controlled by the Kobra 3, it cannot be used independently without the control of the Kobra 3.

When using PLA matte, the ACE Pro may experience compatibility limitations, which can affect the stability and consistency of print quality. To ensure optimal print quality, our product team recommends using a dedicated printer when printing with PLA Matte and avoiding concurrent printing jobs with other materials. This will maximize print quality.