Anycubic Kobra 3 Combo

The numbered annotations on the product page correspond to the following explanations:

① It is necessary to connect two ACE Pro printers with an eight-color feeding module.

② Work with the cam

③ To select models from Makeronline and utilize the Anycubic Slicer slicing software, you must access a PC that already has the software installed.

The Kobra 3 supports PLA, PETG and TPU. TPU is only suitable for single-color printing and is not suitable for printing with ACE Pro.

The ACE Pro supports PLA, PETG, ABS, ASA, PET, PA, PC, PP, HIPS.

The Kobra 3 supports most 1KG filaments with the following specifications: outer diameter ranging from 195-200mm, spool thickness between 60-68mm, and outer wall thickness of 3-3.5mm. Also don't forget to check whether the printing temperature of the consumables is within the temperature range supported by the print head of our machine.

The new version of Anycubic Slicer is now compatible with the Kobra 3 Combo printer. You can download it from the Anycubic official website or by clicking the following link.
Anycubic Slicer is now open source.
We support Cura, OrcaSlicer or other third-party slicing software for multicolor slicing, but highly recommend using Anycubic slicing software for a better multi-color printing experience!
After switching to Orca, it can be supported. For more details, please kindly check here.

Yes. The ACE Pro can precisely detect Intelligent Identification filaments, automatically optimizing printer settings for the best results. If users use filaments without Intelligent Identification, the ACE Pro will not automatically recognize the material and color, users need to switch colors manually when printing.

Anycubic official will do further adaptation development, please continue to pay attention to our official announcements.

The Multi-color Printing Guide has been updated in Anycubic official Wiki, please kindly check it here.It isn't able to print in multicolor whitout ACE Pro.

Anycubic Slicer Next 1.1.1 for Windows has been released, it requires a firmware update to version V2.3.3.9_1.1.6_1.1.6 for compatibility, the latest firmware now fully supports eight-color printing. Please click here to download. Also eight-color printing requires two ACE Pro.

We highly recommend installing the ACE Pro device on the left side of the Kobra 3 printer. This suggestion is based on the design specifications of the Teflon tube and hub accessories, which are optimized for placement on the left side.Placing the ACE Pro device on the right side may potentially interfere with the smooth advancement of the filament, leading to irregular filament feed. Therefore, to ensure optimal performance and functionality, we advise adhering to the left side installation.

No. The ACE Pro includes heating elements for drying, but it is controlled by the Kobra 3, it cannot be used independently without the control of the Kobra 3.

Our standard nozzle diameter is 0.4mm and it is made of brass, The nozzle diameters of Kobra 3 also supports 0.6mm and 0.8mm.

Please kindly check the installation guide here.

The Kobra 3 supports English, Chinese, German, French, Italian, Spanish, Russian, Japanese.