Name: PLA Basic Refill Mix & Match
Brand: ANYCUBIC-EU
SKU: AHPLCG-A106
Price: 16.99 EUR
Availability: InStock

✨Kobra X - €289 with Code KXPP, Save Now >

European Union (English / € EUR)

€16,99

€16,99 ~~€19,99~~

Features

Specifications

File Download

Color Type

Reviews

FAQs

€16,99

€16,99 ~~€19,99~~

Add to cart

PLA Basic Refill

Ecofriendly | Controllable Luster | Intelligent ID | Ease of Installation

Video

Ways to Obtain Anycubic Filament Spools

1. Purchase Anycubic's reusable spools.
2. Reuse your previous spools.
3. Print your own spool from Makeronline.

Stronger Adhesion

The special surface treatment on the cool plate offers PLA filaments extremely strong adhesion at just 45°C. Effectively decreasing the possibilities of warping and bottom layer separation when printing smaller parts and large scale models.

Intelligent & Efficient

The Intelligent Identification chips are integrated with the Anycubic PLA filaments, enabling automatic identification of printing information for seamless workflows.

*Intelligent Identification function requires an internet connection and must be used with Anycubic Intelligent Identification-compatible filaments.

Variant Color

A vast selection of colors opens up more possibilities for creativity and your next project.

Filament Characteristic

Filament Installation

1. Label the Filament

Remove both stickers and both chips (if present). Install new chip stickers onto both flanges.

2. Load the Filament

Open the spool, align the filament with the latch, and snap it into place.

3. Locking the Spool

Close the spool, press firmly, and rotate until you hear a “click," confirming it's locked.

4. Prepare the Filament

Once the spool is locked, remove the bonding strap and thread the filament into the spool hole.

User Application Scenarios

Specifications

Dry Out Before Use

Recommended

Drying Condition

45-50 ℃, 6-8 h

ACE Compatibility

Compatible

Nozzle Size

Recommended 0.2 mm or above

Printing Temperature

190-230 ℃

Heated Bed Temperature

55-56 ℃

Recommended Printing Speed

50-200 mm/s

Cooling Time

8 s

Maximum Volume Speed (Flow Rate)

12 mm³/s

Density

1.24 g/cm³

Melt Index

4~10 g/10 min (190 ℃/2.16 kg)

Melting Point Temperature

166 ℃

Vicat Softening Temperature

55 ℃

Heat Deflection Temperature (0.45MPa)

54 ℃

Young's Modulus

2534±85 Mpa

Tensile Strength

48±5 Mpa

Elongation at Break

8±1%

Bending Modulus

3360±100 Mpa

Bending Strength

90±3 MPa

lzod lmpact Strength (X-Y)

22±2 kJ/m²

Tensile Strength (Z)

26±1 MPa

Filament Type

General filaments

Recommend to Print

Toys, decorative parts, fandom

Intelligent Identification

Supported

Reusable Filament Spool

Supported

File Download

Color Type

ColorHex CodeDisplay

Black#212721

White#EFF0F1

Texture Grey#757878

Texture Silver#8A8D8F

Grey#B1B3B3

Red#C8102E

Yellow#F3E500

Blue#003594

Green#009639

Purple#6A6DCD

Orange#FF7F32

Pink#FF8DA1

Spring Leaf#89A84F

Peach Pink#FFC196

Tropical Turquoise#009CBD

Interstellar Violet#5B618F

Clear/

Brown#927968

Beige#D4B996

Cyan#23A3C7

Magenta#CF4F80

FAQs

What are the recommended printing settings for using Anycubic PLA Basic Refill?

For optimal results, it’s recommended to pre-dry the filament at 45℃–50℃ for 6–8 hours. During printing, use a temperature range of 190℃–230℃ with a heated bed set between 55℃–65℃. A printing speed of 50–200 mm/s, and a maximum volunme speed of 12 mm³/s are advised to achieve high-quality prints while maintaining material integrity.