Couldn't load pickup availability
Compared with Anycubic Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6 liters, and the total volume of the washing bucket is 12 liters, which is suitable for light-curing 3D printers of 10.6 inches and below.
A brand-new dual-layer curing platform has been adopted, which increases the number of models cured per cycle and greatly improves the curing efficiency.
The dual-layer PP cleaning basket supports washing with a platform, with adjustable heights of 150mm and 250mm. Print platforms from 7.6 to 10.6 inches for maximum alcohol efficiency.
The Anycubic Wash & Cure 3 Plus features new lamb bead arrangement with a lens light source, offering 20% better curing uniformity for improved model quality.
The innovative Flexicure gooseneck lights design increases the energy value by 30,000uW/cm²* in the 1~3cm irradiation range,which greatly enhances the curing effect on details such as the top of the model and the figure's skirt.
Sealed structural design and software optimization reduce noise interference for a quieter work environment.
Cleaning and curing dual modes, easily selected with one click; Enhanced Gooseneck light curing mode can be easily toggled on and off with one click. Cleaning and curing time can be easily adjusted from 1 to 30 minutes at will.
